How to Choose an Acrylic Resin for Pigment Dispersion in Water-Based Inks

  • 2026-11-18 15:19:20
  • مشرف

The right resin for a water-based flexographic or gravure ink depends on where you add it. If you mill dry pigment in-house, look for an acrylic grinding resin that helps wet and disperse the pigment and keeps the concentrate easy to remix after storage. If you buy a ready-made water-based pigment dispersion, start with the letdown binder, the resin you blend into the concentrate to make the finished ink. Check that the blend stays uniform, then test gloss, adhesion and rub resistance on the paper or film you plan to print.


When to use a resin solution or a film-forming emulsion

For a high-strength pigment concentrate, start with a waterborne acrylic resin solution designed for high pigment loading. Make trial batches with the pigment you use in production and increase its concentration in steps. At each loading, check whether the pigment slurry, or millbase, still circulates freely through the mill. Record how long it takes to reach the target fineness of grind, then compare color strength after letdown.

If the grinding resin will also form part of the dried ink film, choose a film-forming acrylic emulsion whose technical data sheet lists pigment grinding as an intended use. Once the grind meets your target, compare gloss and rub resistance on the dried print.


Compare grinding trials at equal resin solids

Equal wet weights of two emulsions can deliver different amounts of solids. For example, 10 kg of a 40% solids emulsion and 8 kg of a 50% solids emulsion each supply 4 kg of emulsion solids. Adjust the make-up water to give both batches the same final weight. Keep the pigment charge and milling conditions the same.

Measure each millbase with a grind gauge. Take portions containing equal amounts of pigment and blend them with the same letdown binder. Make drawdowns with the same applicator on the same paper or film, then compare hue, color strength and gloss after drying. The particle size on an emulsion data sheet describes the polymer particles. To assess pigment dispersion, measure fineness of grind on the concentrate itself.


Check compatibility during letdown

Split the freshly ground millbase into two portions. Record the viscosity of the first, seal it and store it under the agreed conditions. Measure its viscosity again at the same temperature and check how readily any sediment stirs back in. Blend the second portion with the letdown binder, water and additives at production ratios. Watch for flocculation, coarse particles or unexpected thickening.

If the retained millbase stays uniform and specks appear only after blending, check the compatibility of the two resins, their ratio and the order of addition. If the formulation contains ethanol or isopropanol, include it at the concentration used in production.


Test the dried ink on the production substrate

Printing requirement What to test
Multicolor paper or paperboard printing Print a single-color solid and a two-color overprint on production stock. Use the solid to assess color development and dry gloss. Check the overprint to see whether the second ink transfers evenly onto the first.
Surface printing on PVC film or edge banding Match the production material and surface treatment. Once the ink has dried fully, check adhesion and rub resistance separately using the customer’s acceptance methods.
Prints exposed to alcohol During mixing, check that the liquid ink stays uniform when alcohol is added. Test the dried print at a fixed alcohol concentration, rubbing load and number of strokes.

During the press trial, record the pH and viscosity of the finished ink against the working ranges for that formulation. If the lab drawdown looks good but foam builds up in the ink pan, check whether the return flow is drawing air into the ink. If ink transfers to the back of the web or adjacent layers stick together on rewind, review ink laydown, press speed and drying conditions before changing the resin.


Product reference · PA-8220 water-based acrylic emulsion for pigment grinding


Frequently Asked Questions


Do I need a separate grinding resin if I buy a ready-made pigment dispersion?

If the purchased dispersion already meets your grind specification, you can begin with the letdown binder. Blend it with the dispersion at the intended ratio, then test the ink on the actual substrate.


Can I use the same grinding resin for different pigments?

The same resin may work with several pigments. Test each pigment at its target loading and compare millbase flow, color strength after letdown and how easily the concentrate remixes after storage.


Why do specks appear after letdown if the millbase met its grind specification?

A change in binder or alcohol concentration during letdown can cause dispersed pigment particles to cluster again. Repeat the letdown with a retained sample, adding the binder, water and any alcohol in the production sequence. Note when specks first appear, then check the blend ratio and order of addition at that step.


Does ethanol compatibility predict alcohol rub resistance?

Ethanol compatibility tells you whether the liquid ink stays uniform at the intended alcohol level. To assess the dried film, run an alcohol rub test under fixed conditions. Check the print for damage and the rub cloth for color transfer.
المنصب القادم

حقوق النشر © 2015-2026 Anhui Sinograce Chemical Co., Ltd..كل الحقوق محفوظة.

top